How to Properly Inspect a Step Ladder before Use

Ladder accidents account for over 40 percent of the deaths caused by falls in the last ten years, so preventing falls should be your number one concern whenever you use a ladder. Inspecting your ladder can prevent falls by recognizing problems before weight is applied to the step ladder. Learn how and when to properly inspect your step ladder to avoid falls, injury, and even premature death.

When Should I Inspect My Step Ladder?

You should inspect your ladder as soon as you retrieve it so that you are aware of any problems before ever using it. Additionally, you should inspect your step ladder before each use, as something could have affected it while in storage. If you have dropped or your ladder has fallen from any distance, you should inspect it for damage before using again.

What am I Looking for When Inspecting?

Place your hand on each step of the ladder to determine if they move. If they are not sturdy, they should not have weight applied to them. Damage or wear to slip-resistant material on steps should be replaced or repaired before use to prevent slips. Look for nails or screws protruding from the ladder that could enter a shoe and cause a fall. Examine all metal parts that hold pieces together, like the spreaders of the ladder. If they are damaged or faulty, they may not be able to hold any weight and collapse. If you own a wooden ladder, look for rotting which could cause your ladder to collapse under pressure. If your step ladder is made from fiberglass, look for cracks that could cause your ladder to buckle under added weight. If your ladder is old or has collected dust, consider replacement before it corrodes beneath you and causes injury that could be prevented. Finally, replace a ladder that has a bowed frame, as it is potentially dangerous to place weight upon.

What Can be Done to Add Life to My Step Ladder?

Along with inspection, taking care of your ladder is a good way to ensure that it has a long life full of use. If you have a fiberglass ladder, you can clean it every 3 months and spray with a lacquer to keep looking new and prevent excess wear and tear. Wooden ladders can be sealed with a wood preservative to extend their working lives, too. Ropes used for pulleys on extension ladders can be lubricated often to prevent fraying. If your ladder has been determined unfit for use, it should be destroyed and replaced.

Replacing a Step Ladder through IndustrialLadder.com

If you have a step ladder that needs replacing, IndustrialLadder.com can provide you with the highest of quality step ladders that you can find on the market. View our vast selection of step ladders on our website. If you see one that you like, you can order it and we will ship it directly to your front door! We pride ourselves on customer satisfaction, so if you have any questions for our highly experienced sales team, please give us a call today at 1-800-833-0800.

The post How to Properly Inspect a Step Ladder before Use appeared first on Industrial Ladders Blog.

from Industrial Ladders Blog http://ift.tt/2fbvzrs
via IFTTT

Tools and Ladder Accessories used in Roofing Construction

There are numerous ladder accessories and roofing tools that you may require for various roofing construction jobs. Rest assured, IndustrialLadder.com can provide you or your business with the needed tools that will help you complete your roofing job. All of our products are provided by high-end brands and shipped directly to your address at an affordable price.
Roofing Hoisting Wheel
This handy roofing accessory helps you get tools and equipment from the ground to your work station by way of an extension ladder, scaffolding, or platform. The wheel is 12 inches around and is attached to two handles that extrude from the sides for handling that are 26 inches wide for easy grip. The rope is not included but the wheel can hold ropes from ½ to 1 inch in diameter.
Core Cutter
This roofing tool allows you to cut a piece of roofing material to determine moisture damage. It is a steel hand-held device in the shape of a cross with teeth at the bottom used for cutting that can be resharpened. The handles can be removed for easier access to tight areas or cleaning. The cutter removes a 7-inch sample of the material in question.
TranzSporter Roof Zone Trailer
This trailer is specifically designed for heavy-duty jobs that require the transportation of heavy materials and tools. It can hold up to 2 thousand pounds of pressure with its sturdy 30-inch by 72-inch frame. Dead man brakes keep the trailer sturdy during loads and a coupling hitch comes with to allow attachment to vehicles. Additional options include flat free tires that guarantee a smooth ride with every use.
Single Shaper
This tool is a must for roofers. It cuts and shapes fiberglass and asphalt shingles for easy placement and installation. It comes standard with an angle meter for precise measurements. This tool is lightweight for easy transportation and use with the option for blade replacement for long product life.
Shingle Removing Tools
IndustrialLadder.com offers a wide variety of shingle removal tools, essential for a roofer’s tool collection. These tools specialize in the removal of shingles and roofs of all types so that they can be reconstructed. Shingle removing tools offered by IndustrialLadder.com include roof rippers, shingle removers, roofer spades, and spud bars.
Ladder Stabilizer
For the best in roofing safety, ladder stabilizers help keep your ladder secure for climbing and departing from a ladder. This ladder stabilizer is optimum for siding, painting, and roofing jobs. It comes attached with rubber marred caps to prevent damage to whatever surface it leans against.
Ladder Hooks
For access to steep roofs, ladder hooks can be added to the top of your extension ladder for safe arrival. The hook secures to the peak of the structure, giving you added support for climbing.
More Roofing Tools and Ladder Accessories
Additional ladder accessories, roofing tools, machinery, job site storage, and much more can be found on our website. If you have any questions or concerns about our products or service, please reach out to us by phone at 1-800-833-0800 and our associates will be happy to help you.

The post Tools and Ladder Accessories used in Roofing Construction appeared first on Industrial Ladders Blog.

from Industrial Ladders Blog http://ift.tt/2eGgBFF
via IFTTT

Two-Man Job? Werner Twin Front Step Ladder Can Help

The Werner twin front step ladder series are some of the most durable ladders on the market, being able to withstand up to 300 pounds of pressure on each side. This means that these ladders can be used by two people at the same time, getting high work done in a fraction of the time it would take otherwise. These step ladders come in different options, with aluminum and fiberglass choices. Before making a decision on which step ladder to purchase, it is worthwhile to look at and examine the features of the Werner twin front step ladders.

Werner T370 Series Twin Front Step Ladder

These aluminum twin step ladders are rated for up to 300 pounds of pressure on each side. The top is extruded aluminum to offer added support and workspace. Steps on either side are slip resistant, offering prime safety even in wet weather. Aluminum brackets enforce the slip resistant foot steps, providing extra support against bending. View these ladders on our website for pricing and ordering options.

Werner T6000 Series Twin Front Step Ladder

This series of twin ladders offer the alternative material, fiberglass. This material is extremely durable and long lasting, as well as a nonconductor of electricity. This makes it safe to use around electrical work. The T6200 series all come with an attached dual holster top that provides storage for tools and equipment while using the ladder. They are rated to withstand up to 250 pounds of pressure on each side, making them optimal for two-person jobs. Safety features are included like slip resistant steps and footing giving you peace of mind each use. These ladders and their sizes, prices, and shipping options are available for view on our website.

Werner T400 Series Twin Front Step Ladder

This series is identical to the T370 series except each side has an added safety rating to hold up to 375 pounds of pressure. If you would like to view sizing, pricing, and shipping options for these ladders please view our website for details.

Werner T6200 Series Twin Front Step Ladder 250 lbs rated

This series is identical to the T6000 series except that each side has an added safety rating to hold up to 300 pounds of pressure. If you would like to view sizing, pricing, and shipping options for these ladders please view our website for details.

Werner T7400 Series Twin Front Step Ladder

This step ladder series is our most heavy duty, offering a safety rating of 375 pounds of pressure on each side. They can be used for almost any job, providing safety and convenience. These ladders are built from fiberglass material, making them nonconductive. Additionally, they come with an extruded aluminum top for added work space and durability. This ladder is even safe to use at night because it includes GlasMark Violator strips that shine in the darkness. Additionally, these ladders are able to last through many years of work thanks to the added durability provided by the Edge external rail shield bracing system. To view the sizing, pricing, and shipping options for this Werner ladder series, visit our website.

The post Two-Man Job? Werner Twin Front Step Ladder Can Help appeared first on Industrial Ladders Blog.

from Industrial Ladders Blog http://ift.tt/2dD6fJZ
via IFTTT

Gain Storage and Workspace with Weatherguard Truck Accessories

Need a way to store more in your truck for work? Weatherguard truck accessories make it possible for you to gain additional work space right in the bed of your truck. Additionally, Weatherguard offers more storage for the bed of your truck, giving you more options to keep tools and equipment right on hand. IndustrialLadder.com provides top of the line Weatherguard truck accessories for all who need extra truck storage shipped right to their door.

Pack Rat Drawer Unit Weatherguard Truck Accessories

These tool drawers give you the ability to store heavy tools and objects into the back of your truck without taking up precious bed space. They each are made with 14-gage steel metal and are able to hold up to 750 pounds of pressure, which means you can store basically whatever you want on top of them. Additionally, slip proof strips are added to the tops of the boxes to provide added support for objects placed on top. These sturdy sliding drawers come in a number of different shapes and sizes with many options for different numbers of drawer compartments and dividers. Each drawer comes with a latch that can be utilized with one hand and is easily assembled.

Bed Rat Sliding Platform Weatherguard Truck Accessories

These bed platforms give you the ultimate truck storage option. They extend up to 70% of the original truck bed space, giving you an added work station and storage options. Finding tools that you need will now be right in the back of your truck, at an elevated level for your convenience. Each platform can withstand up to 750 pounds of pressured weight, so you won’t have to worry about heavy objects ruining your platform. The heavy duty rollers were designed to make each slide of the platform smooth and without restraint. Side and back panels are added to keep objects and equipment from rolling off the sides of the platform. There are two different sliding platforms for different kinds and sizes of trucks.

3200 Bed Rat Sliding Platform

This platform measures 66 inches in length, 44 ¾ inches in width, and 4 ¾ inches in height. It was specifically designed for the pairing with the Chevy Colorado, Chevy full-size short-bed and short-bed sport side, Dodge Dakota 6 ½ foot bed, Dodge full-size short bed, Toyota Tundra short bed, Ford Ranger 6 foot bed, Ford short-bed, and Ford flare side beds.

3400 Bed Rat Sliding Platform

This platform measures 90 inches long, 44 ¾ inches wide, and 4 ¾ inches in height. It was specifically designed for the use in Chevy, Dodge, Ford, and Toyota full-size pickup trucks.

Chose the Right Slide-Out Storage for your Truck?

Once you’ve decided what kind of storage and size is right for you, IndustrialLadder.com can ship you your Weatherguard tuck accessories right to your door! Our affordable prices and impeccable customer service are no match to any other Weatherguard brand dealer you can find today. Shop our Weatherguard truck accessories at our online store today!

The post Gain Storage and Workspace with Weatherguard Truck Accessories appeared first on Industrial Ladders Blog.

from Industrial Ladders Blog http://ift.tt/2eqjUm1
via IFTTT

How to Use an Industrial Ladder Siding Brake

If you own a business or work on a job site that requires the cutting or bending of sheet metal, a siding brake may be what you need. This tool allows for the measuring, bending into specific shapes, and cutting to size of most any type of sheet material. Siding brakes are used for all types of jobs, including making gutters, drip edges, roof and window flashing, and air ducts all from the convenience of your home or job site location. Utilizing a siding brake is fairly easy and straightforward, but there are always safety precautions and handling suggestions to take into mind when using any type of construction equipment.

Proper Safety When Using a Siding Brake

To prevent injury to yourself or others, you must use proper safety techniques while utilizing a siding brake. Read the instruction manual before operating to be sure of any steps that are necessary to take for safety precautions. Additionally, always inspect the siding brake for damage before using. If there is substantial damage, do not operate the machinery until it is fixed to ensure prevention of injury. Also, siding brakes involve the use of large metal sheeting which can cause injury to you or an employee if you do not first clear the area of personnel or debris before operating. Wear heavy duty gloves to prevent hand injury from sharp materials or siding knife. Gloves can also prevent the spread of oils in the skin to materials that are affected by them, like copper.

Using your Siding Brake

Before running any material into the brake, be sure to measure correctly and use a template beforehand to make sure of sizing without wasting expensive sheet metal material. After you’ve practiced on a cardboard template, be sure to mark your materials where they need cutting so that they are clearly visible before making cuts. This saves time by keeping you from having to remeasure and take the material in and out of the brake. Make sure you cut first, because if you want to perform any bending the material cannot be cut afterward.

If you find yourself needing help with using the brake or lifting and carrying sheet metal, do not hesitate to ask for help. Sheet metal can be hard to handle because of size and lack of density, so a second pair of hands may be useful and required.  

Selecting Your Siding Brake

Choosing the right siding brake depends on how large your sheet metal is and what exactly needs to be done. Industrial siding brakes are the largest of these kinds of equipment, but are heavy duty and usually only used by bigger companies for large jobs. Commercial siding brakes can be used in the home and for smaller jobs. Whatever type of siding brake you need, IndustrialLadder.com can provide you with the options that fit your budget, desires, and needs. We provide only the best in brands including Tapco, Van Mark, and Alum A Pole siding brakes. They can all be found on our website for direct ordering and shipping for your convenience.

The post How to Use an Industrial Ladder Siding Brake appeared first on Industrial Ladders Blog.

from Industrial Ladders Blog http://ift.tt/2drh1xM
via IFTTT

Properly Utilizing Lifting Gear and Equipment

Implementing proper safety during lifting gear and equipment use is vital to the safety of you and your employees. Without the proper knowledge in lifting practices, a person can get extremely hurt or even die from lifting related accidents. IndustrialLadder.com understands the importance of safety precautions while using lifting gear and equipment.

Lifting Gear that Requires Safety Regulations

• Overhead position cranes
• Lifts for motor vehicles
• Lifting hoists
• Forklifts
• Any material or personnel lift

What to Do

A lifting operation is defined as anything that has to do with lifting or unloading materials using lifting equipment. If you own a business and also own lifting equipment you must provide safety regulations and adhere to manufacturer instructions of use at all times. Additionally, you must:

• Plan lifting safety operations completely
• Enlist only those that know how to operate machinery to its use
• Supervise these competent individuals during lifting gear use
• Ensure that employees adhere to safety regulations regularly

Inspection is Key

Before any lifting operation has begun, a precaution that must be taken is an inspection. The inspection should be done daily to check for any potential risk of a safety threat. Wear and tear, rust, or any other damage may create safety issues during use. If any lifting gear is deemed damaged or compromised, suspend the machinery’s use until the problem is fixed. Additionally, proper setup of equipment is imperative for inspection. Just a slight offset could make lifting procedures go awry, raising risk for lifting-related injuries during motion. Make sure that any lifting gear being used is properly setup and stable. If the machinery is used on the ground, like forklift or material lifts, make sure the surface that it sits on is level for optimum safety.

Lifting Gear Sold by IndustrialLadder.com

If you are researching safety procedures for lifting gear and equipment because you are in the market for a new lift, IndustrialLadder.com provides top of the line lifts that can be delivered directly to your home or business. The lifts that we provide come in all different sizes and provide aid in a number of different industries. Whatever you need lifting, IndustrialLadder.com can supply you with the lift. Lifts available on our website include:

• RGC Platform Hoist Lifts
• BIL Jax Drywall Lifts
• Vermette Material Lifts

Lifts can help with a number of different jobs because they allow for the lifting of heavy objects and little manpower. Increase your business’ competitive ranking in the industry you work in by being able to do what your competitors can’t. Shop our list of material lifts and platform hoists on our website today. If you find yourself with any questions or concerns, please do not hesitate to reach out to us at 1-800-833-0800.

The post Properly Utilizing Lifting Gear and Equipment appeared first on Industrial Ladders Blog.

from Industrial Ladders Blog http://ift.tt/2efiMQ9
via IFTTT

Guide to Step Ladder Accessories from IndustrialLadder.com

Guide to Step Ladder Accessories Available at IndustrialLadder.com

Step ladders provide height for daily tasks, construction projects, and much more. For the unlimited tasks that step ladders help with, accessories have been designed to help. Step ladder accessories aid in making step ladders a little more useful by adding new components that help perform tasks.

Werner Lasso System Ladder Accessories

This system is a genius idea brought to you by Werner in which tools have a lasso attached at the ends fitted for step ladder trays and Werner ladder top steps. When you are not using a tool, simply slide the lasso end into the slot on the ladder and let it hang hands-free. Many accessories besides lassos can be purchased that fit into the same slots including a caddy, utility hook, bucket, paint cup liner, and ladder hook for storage.

Werner Bucket Rung Hook

Almost any painting job will require the use of a step ladder. Placing a gallon of paint on the very top of a step ladder can cause spills which are frustrating and sometimes irreversible. Werner has developed a solution: the bucket rung hook. This hook, available for positioning either on the left or right side of a step ladder, holds up to one whole gallon of paint. This hook allows you to paint hands free and not worry about spills. It is durable, made with plated steel so that it is ensured a long life full of plenty of use.  

Werner AC24 Multipurpose Project Tray

This useful tray gives step ladder owners the option to hold tools, materials, and paints right on the ladder. It is easily installed and removed. The tray can be installed at multiple heights so that it can be used throughout entire jobs. It also comes with built-in Werner lasso system, in case you want to invest in that down the line. You won’t have to worry about where to store your tools while working on your step ladder ever again. This tray works on almost any Werner ladder.

Werner Ladder Casters

Have a Werner step ladder and wish to be able to add casters for easy movement? Werner supplies caster accessories for their fiberglass step ladder series.

Werner Ladders Pail Shelves

In addition to the handy multipurpose project tray, Werner ladder has come up with other tray designs specifically for painting. There are three paint trays that can be assembled onto any Werner step ladder. The first is the molded plastic pail shelf, which holds a gallon paint can and includes additional storage for paint brushes and other tools. The second tray, the universal auto closing pail shelf, remains closed until weight (like a paint can) is administered onto it. This keeps the tray out of sight and mind when not in use. This tray has additional storage provided for paint rags. Lastly, the universal pail shelf holds any size paint can and holds them in by molded insert. This tray fits both aluminum and fiberglass Werner step ladder products and is built with durable aluminum arms.

The post Guide to Step Ladder Accessories from IndustrialLadder.com appeared first on Industrial Ladders Blog.

from Industrial Ladders Blog http://ift.tt/2eaBWLq
via IFTTT